Image Shows Clamps which are NOT INCLUDED
Options and Add-Ons:- JL Audio ETXv3 Mounting Clamps or Tower Adapters
- JL Audio ETXv3 Marine Tower Speaker Neoprene Covers for All 4 Speakers
Our JL Audio M6 8.8" 4 Tower Speaker Package includes the four, JL Audio 8.8", M6 tower speakers, a JL Audio 800 watt, 8 channel, M-series amplifier, an amp wiring kit, and a 6 meter long, 2 channel, marine RCA cable. Outside of the mounting hardware and speaker wire, this kit includes everything you need to add 4 JL Audio tower speakers to your existing stereo system.
The JL Audio 8.8" M6 tower speakers offer the best sound quality among any tower speakers, period. JL designed the M6 speakers from the ground up to deliver the best sound possible and engineered them to withstand the harsh marine environment. The enclosures are availabe in white sport, white classic, and gunmetal sport speaker grilles. The white models feature a gloss white enclosure while the titanium speakers
have a satin black enclosure. All of the grille options are available with or without RGB LEDs. The 8.8" M6 speakers can handle 125 watts of RMS power and match up perfectly with the 8 channel, 800-watt M-Series amplifier. You will need to bridge the amplifier and be careful with the gain setting so that you don't overpower and burn up the speakers. The M800/8v2 can deliver more than the speakers can handle, but running the amp essentially on cruise control is much better than maxing out a the smaller, M400/4. The 1.25", specially-treated, silk dome tweeter delivers smooth, mid-range response and a richer, warmer, more well balanced output than other marine speakers that use metal and plastic tweeter materials.
The M-series, 800 watt, 8 channel amplifier deliversmore than enough RMS power for the 8.8" M6 ETXv3 tower speakers when bridged to power the 4 tower speakers. The JL Audio M-series amplifiers are among the most popular marine amps in the world thanks to their unrivaled performance, clean yet powerful output, and superior thermal management. When running
a 4 ohm load, these amps can deliver power to your speakers, while playing loud, all-day, regardless of the outside temperature. The Class-D circuitry combined with JL's signal processing make the M-series amps a no-brainer when it comes to powering your boat's stereo system. As we stated before, with this setup you can power you bridge the amplifier, keep the gains down low, and take some of the stress off of the the amplifier if you use your boat in really hot weather, you play your music really loud, and you play your system all day long.
The Stinger marine amp kit uses the traditional marine colors of red and yellow and has siamese, 4 AWG power wire. The 4 AWG wire insulation is connected like what you typically see from standard speaker wire and the power and ground wires are the same length. This allows you to easily run your power wires
from your amplifier to your battery and you only have to pull 1 wire. The amp kit includes a marine-grade, 80 amp fuse holder and everything else you should need for power. The amp kit does not include a circuit breaker, but you can add a JL Audio or Stinger circuit breaker if you choose to go that route. For the RCA cable,
we include a single, two channel, 6 meter marine RCA cable to run from your head unit to the amplifier. Typically your tower speakers are treated as a single zone and since the JL Audio amps have selectable input switches, you can power all 4 channels from a 2 channel RCA. You don't need to fade from front to rear, but if you want to, you can always add an additional
RCA, separately.
Because mounting surfaces, tube diameters, and other variables are so different from boat to boat, we offer you the option to add mounting clamps, hardware, or OEM tower adapters. Also, don't forget to protect your investment by adding neoprene covers to cover your speakers while your boat
is not in use.
If you opt for the LED models, you will likely want to add an RGB LED controller if you don't already have one. We like the Stinger Marine RGB LED controller due to it's current rating and it has Bluetooth built-in so that you can change and control your speaker LEDs from your phone via an app. We also recommend Stinger 6 conductor, RGB LED speaker wire to easily
power both your speakers and your lights with a single jacketed cable. The speaker wire has two 16 AWG conductors to power the speakers and 4 smaller conductors to connect to your speaker's RGB LEDs.
