My Cart: 0 item(s)
Wet Sounds REVO 6 6 Speaker + 2 REV 10 Swivel Clamp Stereo Package

Description
What is Included?
This package includes the following:
- (6) REVO 6 6.5" Speakers
- (2) REV 10 Tower Speakers w/ Swivel Clamps (1.75" -3" Dia)
- Wet Sounds Marine Amplifier Setup
- (1) 4 AWG Marine Amp Wiring Kit per Amplifier
Wet Sounds was the first company to offer horn tweeter, marine tower speakers with their REV series speakers. They have perfected the art of getting loud while on the water. The REV 10 tower speakers are insane. They provide maximum distance and the large 10" cone provides enough sub and mid-bass response that you usually don't need a subwoofer. If you want to ensure that the people you are towing can hear the music loud and clear, the Wet Sounds REV 10 are one of the best options available. The Wet Sounds REVO speakers feature 1" titanium dome tweeters and more power handling than most other coaxial hull mounted speakers. In addition, all of the REVO speakers come with RGB LEDs built into the speakers. If you are looking to get loud, and you like your music bright and in your face, you can't go wrong with Wet Sounds. With boats, there is a ton of noise from the engine, wind, and water. You need something that is going to cut through that ambient noise so that you can hear your music loud and clear. The environment intself does not lend itself the ultimate in sound quality because of all of that ambient noise. You want to make sure your stereo can get loud and Wet Sounds does that. The SYN-DX amplifiers that are included feature fully sealed chassis and stainless hardware to stand up to the elements and super efficient class D circuitry to provide maximum power. These amps match up perfectly with both the REVO hull speakers and the REV 10 tower speakers. Wet Sounds only does marine audio and they do it better than anyone.
Wet Sounds REVO 6 XS-B-SS 6.5" Coaxial Speakers Black XS Grille Stainless Overlay Pair

Product Specs
RMS Power Handling
100 Watts
Peak Power Handling
200 Watts
Impedance
4 Ohms
Frequency Response
40Hz - 22kHz
Sensitivity
90 db @ 1w/1m
Mounting Depth
3.3" (84mm)
Mounting Hole Dia.
5.0" (127mm)
Diamater with Grille
6.8" (172.72mm)
Wet Sounds REV 10 Swivel Clamp Black Pair

Product Specs
RMS Power Handling
300 Watts
Peak Power Handling
600 Watts
Impedance
4 Ohms
Frequency Response
20Hz - 20kHz
Sensitivity
92 db @ 1w/1m
Depth
13" (330.20mm)
Width
10.625" (269.87mm)
Hang Height
11.5625 (293.68mm)
Hang Weight
14.8 lbs (6.71 kg) ea.
Tweeter
Horn
Wet Sounds SYN-DX 6 Syndicate DX Series 1400 Watt 6 Ch. Amp

Product Specs
Rated Power @ 4 Ohm (Ch. 1-4)
125W x 4
Rated Power @ 2 Ohm (Ch. 1-4)
200W x 4
Rated Power @ 4 Ohm (Ch. 5-6)
150W x 2
Rated Power @ 2 Ohm (Ch. 5-6)
300W x 2
Rated Power @ 4 Ohm Bridged (Ch 1-4)
400W x 2
Rated Power @ 4 Ohm Bridged (Ch 5-6)
600W x 1
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Low Level .2V - 6.1V
Filters
High and Low Pass
Crossovers
12 dB/Octave
Recommended Power Wire
4 AWG
Height
3.08" (78.23mm)
Width
14.57" (370mm)
Depth
8.27" (210mm)
Wet Sounds SYN-DX 2.3 HP Syndicate DX Series 1200 Watt 2 Ch. Amp

Product Specs
Rated Power @ 4 Ohm
300W x 2
Rated Power @ 2 Ohm
600W x 2
Rated Power @ 4 Ohm Bridged
1200W x 1
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Low Level .2V - 6.0V
Filters
High and Low Pass
Crossovers
12 dB/Octave
Recommended Power Wire
4 AWG
Height
3.08" (78.23mm)
Width
14.63" (371.60mm)
Depth
8.52" (216.4mm)
How do I wire the hull speakers?
Powering the speakers for audio is straightforward with this package. For each channel, connect positive on the amplifier to positive on the speaker and negative on the amp to negative on the speaker. Do this for all 6 speakers using all 6 channels on the SYN-DX6 amplifier. The SYN-DX2.3 HP will be used to power the tower speakers
How do I wire the tower speakers?
The tower speaker wiring for the tower speakers is the same as the hull speakers. Use SYN-DX2.3 HP amplifier. Connect positive to positive and negative to negative for both the left and right outputs on the amplifier
How do I wire LEDs in the speakers?
The LEDs in the speakers require 6 conductor speaker wire, or some refer to it as multi-function cable, or RGB speaker wire. This wire is jacketed cabled with 2 larger 16 AWG conductors for the audio signal and power, and then 4 smaller conductors to power the LEDs. The LEDs will illuminate as a single static color when powered on. The black wire is for 12V power. Whichever colors you connect to ground will be the colors that will illuminate. If you connect, splice, and ground only the red wires, you will get red. The same is true for both blue and for green. You can also combine colors for more options. Red/Green make lime green, Red/Blue make magenta, Blue/Green make aquamarine, and Red/Blue/Green make blue-white. See the owner's manual for more details. You can also add an LED controller (sold separately) which allows you to choose between 20 different colors and 19 different flashing/color-changing modes.
Are clamps/mounting hardware included with the tower speakers?
Yes. Please refer to the product name for the specific hardware included for the REV tower speakers.
Is the amp wiring kit included?
No. We do not include the amp wiring kit because every boat ends up being different. Depending on the location of your amps and the battery location, the power wire might need to be 20+ feet long for one boat and only 9 feet long for the next.
What about the RCAs?
Similar to the amp wiring kit situation, we also don't include the RCAs because we don't know the length you need and it varies from boat to boat.
Is speaker wire included?
Speaker wire is not included. Once again, we don't know the exact length you might need.
Community Questions & Answers
{{ totalQuestions }}{{ (totalQuestions === 1) ? ' Question' : ' Questions' }} with {{ totalAnswers }}{{ (totalAnswers === 1) ? ' Answer' : ' Answers' }}
Ask a Question
Question
Name
Email
Submit Question
A confirmation email will be sent to your email address before your question can be posted.
Success!
Uh Oh
Page {{ currentPage }} out of {{ totalPages }}
{{ question.asker.display_name }}
QUESTION{{ textDecode(question.content) }}
{{ answer.answerer.display_name }}
Store Owner
COMMUNITY ANSWER
{{ textDecode(answer.content) }}
Page {{ currentPage }} out of {{ totalPages }}
Why Should You Buy from MarineStereo.com?
- Free Shipping on Orders over $100
- Free Returns
- 60 Day Satisfaction Guarantee
- We Are Online Authorized
You don't have to pay for shipping on all orders over $100. Applies to the continental US only. Orders under $100 are a flat rate, $9.95.
You can return any item within 30 of receipt. Continental US only. No re-stocking fees. We email you a label. You drop it off at a FedEx location. Items must be un-installed and in the original packaging.
We sell the best products in the industry. If you decide within 60 days that you don't like the way your boat sounds, let us know. We will work with you to exchange your products for something else. We want you to be happy with the way your boat sounds, we believe in the products we sell, and we are confident that we can find a solution that will put a smile on your face.
We are online authorized to sell the best marine audio products in the world. When you buy from MarineStereo.com, not only do we stand behind the product, but so does the manufacturer. We are online authorized for Wet Sounds, Kicker, Rockford Fosgate, Fusion, Memphis, Stinger, Hertz, Roswell and more. Your warranty is valid and you are protected.