My Cart: 0 item(s)
What is Included?
This package includes the following:
- (4) Kicker 8" KM84L Marine Speakers w/ RGB LEDs
- (2) Kicker 8" Marine Coaxial Tower Speakers w/ RGB LEDs (Select Color)
- (1) Rockford Fosgate TM400x4ad 400W 4 Channel Amplifier
- (1) Rockford Fosgate TM400x2ad 400W 2 Channel Amplifier
The package combines with great value you get with Kicker coaxial speakers in the hull with ridiculous volume, loudness, distance, and clarity from the massive Kicker horn tower speakers. The Kicker coaxial hull speakers come with both white and charcoal grilles and feature titanium dome tweeters that will play both loud and clear. The Kicker horn tower speakers are insane. The horn tweeter blows away coaxial tower speakers and they include RGB LEDs. The horn tweeters are going to ensure that you get maximum distance and volume for the people that you are towing behind the boat. If you aren't towing, the horn tower speakers will give you the ability to ensure that everyone within a close proximity can hear your music, if you really want them to. The large size of the horn speakers can usually provide enough low-frequency response that you don't need to worry about adding a subwoofer. The Kicker KXM amps are both powerful and reliable. You can run these amps all day long, as loud as you want, and you don't have to worry about them overheating and cutting out. If you are looking for great sound quality at an affordable price, you can get it from one of the most trusted brands in all of marine and car audio. You can't go wrong with this Kicker tower speaker package
Kicker KM8 8 Inch Marine Grade Coaxial Speakers with LEDs White & Charcoal Grilles 4 Ohm
Product Specs
RMS Power Handling
150 Watts
Peak Power Handling
300 Watts
Impedance
4 Ohms
Frequency Response
30 Hz - 21 Khz
Sensitivity
92.0db @ 1W/1m
Mounting Depth
3.75" (82mm)
Mounting Hole Dia.
6.6875" (170mm)
Grilles Included
Both White and Charcoal
LED Lighting
Yes (Use KMLC to Control)
Kicker KMTC8W 8 Inch Loaded Marine Wake Tower Speakers White Pair
Product Specs
RMS Power Handling
150 Watts
Peak Power Handling
300 Watts
Impedance
4 Ohms
Frequency Response
30 Hz - 21 Khz
Sensitivity
92.0db @ 1W/1m
Height Incl. Bracket
12.375" (314mm)
Height from. Bar
9.4375 (240mm)
Diameter
8.1875" (207mm)
Depth
11.3125" (286mm)
LED Lighting
Yes
Rockford Fosgate TM400X4AD Power Mini 400 Watt 4 Channel Marine Amplifier
Product Specs
Rated Power @ 4 Ohm
100W x 4
Rated Power @ 2 Ohm
100W x 4
Rated Power (Bridged @ 4 Ohms)
200W x 2
Frequency Response
20Hz - 20kHz
Input Sensitivity
150 mV to 12 V
Filters
High-Pass, Low-Pass, All-Pass
Crossovers
12 dB/Octave
LED Clipping Indicator
Yes
Recommended Power Wire
8 AWG
Height
1.6" (41mm)
Width
4.3" (108mm)
Depth
7" (178mm)
Rockford Fosgate TM400X2AD Power Mini 400 Watt 2 Channel Marine Amplifier
Product Specs
Rated Power @ 4 Ohm
200W x 2
Rated Power @ 2 Ohm
200W x 2
Rated Power (Bridged @ 4 Ohms)
400W x 1
Frequency Response
20Hz - 20kHz
Input Sensitivity
150 mV to 12 V
Filters
High-Pass, Low-Pass, All-Pass
Crossovers
12 dB/Octave
LED Clipping Indicator
Yes
Recommended Power Wire
8 AWG
Height
1.6" (41mm)
Width
4.3" (108mm)
Depth
8.3" (211mm)
Stinger Marine 4ga Amp Power Kit
Product Specs
Power/Ground Wire Length
22.96 ft (7m)
Remote Wire AWG/Legnt
22.96 ft(7m)/18ga
Fuse Holder
Water Resistant MIDI/AFS
Included Fuse Rating
80A MIDI/AFS
Ring Terminals Included
2 4ga Power (Red & Yellow)
Power/Ground Wire Ferrules
2 Pcs (4 ga)
Speaker Wire Ferrules
4pcs (16ga)
Remote Wire Ferrules
1pc (18ga)
Spade Terminals
5 pcs 16-22ga
Fork Terminals
2 pcs (8 ga)
Butt Connectors
1 pcs (22-18ga)
Allen Key
1 Pc
Cable Ties
20 pcs, 7" Long
How do I wire the hull speakers?
You will need to wire all 4 hull speakers off of Amp1 on the KXMA400.4 amplifier. Connect the positive terminal on the amplifier to positive on both of the left speaker sand negative on the amp to negative on the left speakers. Repeat the same process for the right side. Please see the diagram for more details.
How do I wire the tower speakers?
The tower speaker wiring is the same as the hull speakers. Wire the tower speakers off of the Amp2 channel on the KXMA400.4, and connect positive to positive and negative to negative for the left and right speakers respectively. If your tower has been pre-drilled to run wire, you can run wire through the tower, you can choose to drill into your tower, or you can run the wire along the tower. If you run wire along the tower, we recommend using zip ties every couple of inches for a clean install that is not going to flap in the wind.
How do I wire LEDs in the speakers?
The LEDs in the speakers require 6 conductor speaker wire, or some refer to it as multi-function cable, or RGB speaker wire. This wire is jacketed cabled with 2 larger 16 AWG conductors for the audio signal and power, and then 4 smaller conductors to power the LEDs. The LEDs will illuminate as a single static color when powered on. The black wire is for 12V power. Whichever colors you connect to ground will be the colors that will illuminate. If you connect, splice, and ground only the red wires, you will get red. The same is true for both blue and for green. You can also combine colors for more options. Red/Green make lime green, Red/Blue make magenta, Blue/Green make aquamarine, and Red/Blue/Green make blue-white. See the owner's manual for more details.
Are clamps included with the tower speakers?
Yes, the Kicker coaxial tower speakers include a single clamp design for each speaker and they swivel 359-degrees so that you can aim them exactly where you want to, depending on whether you are towing someone behind the boat, or on dry land with the boat docked.
Is the amp wiring kit included?
No. We do not include the amp wiring kit because every boat ends up being different. Depending on the location of your amps and the battery location, the power wire might need to be 20+ feet long for one boat and only 9 feet long for the next. The way to solve for this would be to include a 20 foot long amp wiring kit in with every package. This would then force
the customer than only needs 9 feet to overpay for something he or she doesn't need.
What about the RCAs?
Similar to the amp wiring kit situation, we also don't include the RCAs because we don't know the length you need and it varies from boat to boat.
Is speaker wire included?
Speaker wire is not included. Once again, we don't know the exact length you might need. If we include it, we have to make sure we err on the side of including too much as opposed to too little.
Why Should You Buy from MarineStereo.com?
- Free Shipping on Orders over $100
- Free Returns
- 60 Day Satisfaction Guarantee
- Online Authorized
You don't have to pay for shipping on all orders over $100. Applies to the continental US only. Orders under $100 are a flat rate, $9.95.
You can return any item within 30 of receipt. Continental US only. No re-stocking fees. We email you a label. You drop it off at a FedEx location. Items must be un-installed and in the original packaging.
We sell the best products in the industry. If you decide within 60 days that you don't like the way your boat sounds, let us know. We will work with you to exchange your products for something else. We want you to be happy with the way your boat sounds, we believe in the products we sell, and we are confident that we can find a solution that will put a smile on your face.
We are online authorized to sell the best marine audio products in the world. When you buy from MarineStereo.com, not only do we stand behind the product, but so does the manufacturer. We are online authorized for JL Audio, Wet Sounds, Kicker, Rockford Fosgate, Fusion, Memphis, Stinger, Hertz, and more. Your warranty is valid.