My Cart: 0 item(s)
Kicker Marine 6.5" 8 Speaker + 4 6.5" White Tower Speaker Stereo Package
$2,549.65
Need help with your order? Give us a call at 800-480-0647.
This package is perfect for you if...
- You are want to upgrade the system in your boat that currently has (8), 6.5" speakers in the hull and you want to add or upgrade (4) tower speakers
- Your boat does not currently have a stereo system in it, but you have room for (8) 6.5" speakers and you want to add (4) tower speakers
- When out on the water, you want to make sure your music is loud enough and clear enough that both you and the people you are towing you can hear your music clearly and without distortion over the engine, wind, and water noise, even 50-100 yards behind the boat
What is Included?
This package includes the following:
- (8) Kicker 6.5" KM65 Marine Speakers
- (2) White Kicker Dual 6.5" Marine Coaxial Tower Speakers w/ RGB LEDs
- (1) Kicker KXM 800W 8 Channel Amplifier
- (1) KXM 400W 4 Channel Amplifier
Kicker marine speakers are probably the best value on the market in terms of price, volume, and sound quality. The Kicker KM coaxial speakers come with titanium dome tweeters that will play bright, loud, and cut through any engine, wind and water noise. The Kicker coaxial speakers for the hull come with both white and charocal grilles. The coaxial tower speakers use the same speaker that is in the hull, but it is in an enclosure that comes with a single swivel clamp. The enclosure will give you improved bass response and mounting them up on the tower provides extra distance to reach the people you are towing. The Kicker KXM amps are both powerful and reliable. You can run these amps all day long, as loud as you want, and you don't have to worry about them overheating and cutting out. If you are looking for great sound quality at an affordable price, you can get it from one of the most trusted brands in all of marine and car audio. You can't go wrong with this Kicker tower speaker package
Kicker KM65 6.5" Marine Speakers White & Charocal Grilles 4 Ohm
.jpg "Kicker KM65 6.5")
Product Specs
RMS Power Handling
65 Watts
Peak Power Handling
195 Watts
Impedance
4 Ohms
Frequency Response
35 Hz - 21 Khz
Sensitivity
90.0db @ 1W/1m
Mounting Depth
2.785" (72mm)
Mounting Hole Dia.
5.125" (130mm)
Grilles Included
Both White and Charcoal
LED Lighting
No (P/N 45KMC654L Has Lights)
Kicker KMTC65 6.5 Inch Loaded Marine Dual Wake Tower Speakers Charcoal/White Pair
.jpg "Kicker KMTC65 6.5 Inch Loaded Marine Dual Wake Tower Speakers Charcoal/White Pair")
Product Specs
RMS Power Handling
130 Watts per Encl.
Peak Power Handling
390 Watts per Encl.
Impedance
2 Ohms/Enclosure
Frequency Response
35 Hz - 21 Khz
Sensitivity
93.0db @ 1W/1m
Height Incl. Bracket
10.25" (260mm)
Height from. Bar
8.25" (228mm)
Width
14.0675" (357mm)
Depth
9.6875" (245mm)
LED Lighting
Yes
Kicker KXMA800.8 800 Watt 8 Channel Marine Amplifier
Product Specs
Rated Power @ 4 Ohm (Full Range)
50W x 8
Rated Power @ 2 Ohm (Full Range)
100W x 8
Rated Power @ 4 Ohm (Bridged)
200W x 4
Frequency Response
10Hz - 20kHz
Input Sensitivity
250mV - 10V
Filters
OFF, High-Pass, Low-Pass, Band-Pass
Crossovers
24 dB/Octave
Signal to Noise Radio
95dB
Selectable Input Mode
Yes (Detect)
Pass-Through Pre-Amp Output
No
Recommended Power Wire
4 AWG
Height
2.125" (55mm)
Width
14.75" (374mm)
Depth
8.2135" (210mm)
Remote Level Control
No
Kicker KXMA400.4 400 Watt 4 Channel Marine Amplifier
Product Specs
Rated Power @ 4 Ohm (Full Range)
50W x 4
Rated Power @ 2 Ohm (Full Range)
100W x 4
Rated Power @ 4 Ohm (Bridged)
200W x 2
Frequency Response
10Hz - 20kHz
Input Sensitivity
250mV - 10V
Filters
OFF, High-Pass, Low-Pass, Band-Pass
Crossovers
24 dB/Octave
Signal to Noise Radio
95dB
Selectable Input Mode
Yes
Pass-Through Pre-Amp Output
No
Recommended Power Wire
4 AWG
Height
2.125" (55mm)
Width
11.185" (284mm)
Depth
8.2135" (210mm)
Remote Level Control
No
How do I wire the hull speakers?
Powering the speakers for audio is straightforward with this package. On the KXMA800.8 8 channel amlpfier, connect positive on the amplifier to positive on the speaker and negative on the amp to negative on the speaker. Do this for all 8 speakers and you should be good to go.
How do I wire the tower speakers?
The tower speaker wiring is straightforward. Wire the tower speakers off of the KXMA400.4, 4 channel amplifier and connect positive to positive and negative to negative for the left and right speakers respectively. If your tower has been pre-drilled to run wire, you can run wire through the tower, you can choose to drill into your tower, or you can run the wire along the tower. If you run wire along the tower, we recommend using zip ties every couple of inches for a clean install that is not going to flap in the wind.
How do I wire LEDs in the speakers?
The LEDs in the speakers require 6 conductor speaker wire, or some refer to it as multi-function cable, or RGB speaker wire. This wire is jacketed cabled with 2 larger 16 AWG conductors for the audio signal and power, and then 4 smaller conductors to power the LEDs. The LEDs will illuminate as a single static color when powered on. The black wire is for 12V power. Whichever colors you connect to ground will be the colors that will illuminate. If you connect, splice, and ground only the red wires, you will get red. The same is true for both blue and for green. You can also combine colors for more options. Red/Green make lime green, Red/Blue make magenta, Blue/Green make aquamarine, and Red/Blue/Green make blue-white. See the owner's manual for more details.
Are clamps included with the tower speakers?
Yes, the Kicker coaxial tower speakers include a single clamp design for each speaker and they swivel 359-degrees so that you can aim them exactly where you want to, depending on whether you are towing someone behind the boat, or on dry land with the boat docked.
Is the amp wiring kit included?
No. We do not include the amp wiring kit because every boat ends up being different. Depending on the location of your amps and the battery location, the power wire might need to be 20+ feet long for one boat and only 9 feet long for the next. The way to solve for this would be to include a 20 foot long amp wiring kit in with every package. This would then force
the customer than only needs 9 feet to overpay for something he or she doesn't need.
What about the RCAs?
Similar to the amp wiring kit situation, we also don't include the RCAs because we don't know the length you need and it varies from boat to boat.
Is speaker wire included?
Speaker wire is not included. Once again, we don't know the exact length you might need. If we include it, we have to make sure we err on the side of including too much as opposed to too little.
Why Should You Buy from MarineStereo.com?
- Free Shipping on Orders over $100
- Free Returns
- 60 Day Satisfaction Guarantee
- Online Authorized
You don't have to pay for shipping on all orders over $100. Applies to the continental US only. Orders under $100 are a flat rate, $9.95.
You can return any item within 30 of receipt. Continental US only. No re-stocking fees. We email you a label. You drop it off at a FedEx location. Items must be un-installed and in the original packaging.
We sell the best products in the industry. If you decide within 60 days that you don't like the way your boat sounds, let us know. We will work with you to exchange your products for something else. We want you to be happy with the way your boat sounds, we believe in the products we sell, and we are confident that we can find a solution that will put a smile on your face.
We are online authorized to sell the best marine audio products in the world. When you buy from MarineStereo.com, not only do we stand behind the product, but so does the manufacturer. We are online authorized for JL Audio, Wet Sounds, Kicker, Rockford Fosgate, Fusion, Memphis, Stinger, Hertz, and more. Your warranty is valid.